CRADLEPOINT
MBR1400 | USER MANUAL – Firmware version 4.4
© 2013
CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 166
Keep Alive:
This feature monitors the status of a tunnel. This will more accurately determine if the tunnel is alive or not.
Choose the length of time in seconds of the
Rate
for each check (Default: 10 seconds. Range: 2
– 3600 seconds) and the
number of
Retry
attempts (Default: 3. Range: 1
– 255).
Page 2: Routes
Adding routes allows you to configure what types of
network traffic from the local host or hosts will be allowed
through the tunnel.
Click
Add Route
to configure a new route. You will need
to input the following information, defined by the remote
network:
Network Address
Netmask:
(Default: 255.255.255.0)
You can set the tunnel to connect to a range of IP
addresses or to a single IP address. For example, you
could input
192.168.0.0
and
255.255.255.0
to connect
your tunnel to all the addresses of the remote network in
the
192.168.0.x
range. Alternatively, you could select a
single address by inputting that address along with a
Netmask of
255.255.255.255
.
Click
Save
to record each new route.
When you have finished adding routes, click
Finish
to save your GRE tunnel configuration.
Summary of Contents for MBR1400LE-VZ
Page 1: ......
