Cradlepoint MBR1400LE-VZ Product Manual Download

Page: 151 / 243

CRADLEPOINT

MBR1400 | USER MANUAL – Firmware version 4.4

CRADLEPOINT, INC. PLEASE VISIT

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 149

Automatically check for new firmware:

(Default: selected) The modem will automatically check for firmware updates by

default.

Modem Connection Mode:

Specify how the modem should connect to the network. Not all options are available for all

modems; this will default to Auto if an incompatible mode is selected.



Auto (all modes):

Let the modem decide which network to use.



Auto 3G (3G or less):

Let the modem decide which 2G or 3G network to use. Do not attempt to connect to LTE.



Force LTE:

Connect to LTE only and do not attempt to connect to 3G or WiMAX.



Force 3G (EVDO, UMTS, HSPA):

Connect to 3G network only.



Force 2G (1xRTT, EDGE, GPRS):

Connect to 2G network only.

See the following tables for a breakdown of the technologies used with various CradlePoint COR models when any

Modem Connection Mode

is selected.

CDMA Technology

Auto

Auto 3G

Force 4G

Force 3G

(module auto selects)

Force 2G

(<= 3G)

LTE

1xEVDOAe

(EHRPD)

1xEVDO-A

(HRPD) (3G)

1xEVDO-0

(HRPD) (3G)

1xRTT

(2.5G)

ARC MBR1400LE
(Sierra Wireless MC7750)

✔

Summary of Contents for MBR1400LE-VZ




















































































































































































































































Search results

Summary of Contents for MBR1400LE-VZ

Reviews:

Related manuals for MBR1400LE-VZ

Brands by name

Popular brands

Cradlepoint MBR1400LE-VZ, Product Manual

Search results

Summary of Contents for MBR1400LE-VZ

Reviews:

Related manuals for MBR1400LE-VZ

Brands by name

Popular brands