manualshive.com logo in svg

Cradlepoint MBR1400LE-VZ, Product Manual

The Cradlepoint MBR1400LE-VZ is a powerful networking device designed for high-speed connectivity. To make the most of its features, download the comprehensive Product Manual for free from manualshive.com. This manual provides essential instructions and troubleshooting tips, ensuring seamless usage of this cutting-edge device.

Share
Download
background image

CRADLEPOINT 

MBR1400 | USER MANUAL – Firmware version 4.4

 

© 2013 

CRADLEPOINT, INC.                                        PLEASE VISIT 

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

 FOR MORE HELP AND RESOURCES 

 

 

 

 PAGE 146  

 

7.1.6

 

Ethernet Settings 

While default settings for each WAN Ethernet port will be sufficient in most circumstances, you have the ability to control:  

 

Connect Method:

 DHCP (Automatic), Static (Manual), or PPPoE (Point-to-Point Protocol over Ethernet).  

 

MAC

 

Address: 

You have the ability to change the MAC address, but typically this is unnecessary. You can match 

this address with your device’s address by clicking: “

Clone Your PC’s MAC Address

”. 

 

Connect Method 

Select the connection type that you need for this 
WAN connection. You may need to check with your 
ISP or system administrator for this information.  

 

DHCP

 (Dynamic Host Configuration Protocol) 

is the most common configuration. Your router’s Ethernet ports are automatically configured for DHCP connection. 
DHCP automatically assigns dynamic IP addresses to devices in your networks. This is preferable in most 
circumstances. 

 

Static

 allows you to input a specific IP address for your WAN connection; this should be provided by the ISP if 

supported.  

 

PPPoE

 should be configured with the username, password and other settings provided by your ISP.  

If you want to use a Static (Manual) or PPPoE connection, you will need to fill out additional information. 

Summary of Contents for MBR1400LE-VZ




















































































































































































































































Reviews:

No comments

Related manuals for MBR1400LE-VZ

D-Link DIR-855L Quick Installation Manual preview
DIR-855L
Brand: D-Link Pages: 28
D-Link DIR-826L Quick Install Manual preview
DIR-826L
Brand: D-Link Pages: 2
D-Link DIR-655 - Xtreme N Gigabit Router Wireless Quick Start Manual preview
DIR-655 - Xtreme N Gigabit Router Wireless
Brand: D-Link Pages: 3
D-Link DIR-605L Technical Support Setup Procedure preview
DIR-605L
Brand: D-Link Pages: 11
D-Link DIR-822 Quick Instillation Manual preview
DIR-822
Brand: D-Link Pages: 35
D-Link DIR-880L Quick Install Manual preview
DIR-880L
Brand: D-Link Pages: 12
D-Link DIR-842 Quick Install Manual preview
DIR-842
Brand: D-Link Pages: 12
D-Link DIR-821 Quick Install Manual preview
DIR-821
Brand: D-Link Pages: 24
D-Link DIR-803 Quick Installation Manual preview
DIR-803
Brand: D-Link Pages: 20
D-Link DIR-815/AC Quick Installation Manual preview
DIR-815/AC
Brand: D-Link Pages: 44
D-Link DIR-830M Quick Installation Manual preview
DIR-830M
Brand: D-Link Pages: 52
D-Link DIR-821 User Manual preview
DIR-821
Brand: D-Link Pages: 103
GE MDS 4710M Setup Manual preview
MDS 4710M
Brand: GE Pages: 6
IBM AS/400 Hardware User Manual preview
AS/400
Brand: IBM Pages: 104
IBM System Storage TS3100 Setup, Operator, And Service Manual preview
System Storage TS3100
Brand: IBM Pages: 375
PaloAlto Networks PA-5400 Series Quick Start Manual preview
PA-5400 Series
Brand: PaloAlto Networks Pages: 2
Draytek VigorIPPBX 2820 Series Quick Start Manual preview
VigorIPPBX 2820 Series
Brand: Draytek Pages: 29
REXROTH efc series Instruction Manual preview
efc series
Brand: REXROTH Pages: 68

Brands by name

Popular brands

Load more brands