8
A:
moves a document up 1/60" with each depression. If held depressed, the document will slowly
move into the printer. Also initiates document insertion if the printer is configured for key rather
than automatic insertion. (See 3.6.1)
B:
moves a document down 1/60" with each depression. If held depressed, the document will slowly
move out of the printer .
FUNCT:
enters previously keyed digits as a function code. All function codes beginning with 9 are reserved
for internal printer operations. All other function codes are transmitted to the host system and
their usage is defined by the host. On printers with the auto alignment feature, pressing FUNCT
before document insertion will disable auto alignment for an individual document. See 3.6.5 to
configure auto alignment.
CLEAR:
erases any previously keyed digits before they are transmitted to the host by the FUNCT or
ENTER keys.
ENTER:
transmits previously keyed digits to the host system. All responses are defined by the host. This
key also initiates document printing if the printer is configured to delay printing until the ENTER
key is pressed (See 3.6.1).
0 to 9:
enter digits to be transmitted to the host by the FUNCT or ENTER keys. Key depressions appear
on the lower display line.
KEYPAD
& DISPLAY
PANEL
3.5
DISPLAY
OPERATION
The
display
consists of 2 lines
of
16
characters
each and is used
to display messages both from the printer and the host system. There is a contrast knob to the left of the
EJECT key that should be adjusted for maximum legibility depending on the display viewing angle. When the
printer is turned on, "READY" will be displayed.
READY
1
2
FUNCT
CLEAR
ENTER
EJECT
3
4
5
6
7
8
9
0
B
A
