Page 16 of 16
v3.1
Never remove the cover when the strobe is flashing.
The piezo transformer will be hot during and after sounding. Whilst not directly hazardous, touching it
when hot will cause discomfort and should be avoided.
When the Senza is in an alarm condition, high voltages are present. Before removing the cover, stop the
piezo and strobe from operating.
Failure to observe the following precautions regarding the batteries could lead to danger of heating,
ignition, explosion and leaking of hazardous chemicals.
•
Do not throw into a fire
•
Do not heat
•
Do not overcharge
•
Do not reverse charge
•
Do not attempt to charge the battery used in the wire-free version as it is not rechargeable
•
Do not short circuit the battery wires
•
Do not disassemble
Always observe local regulations when disposing of a battery.
Plastic bags can suffocate, always dispose of packaging carefully.
Order code
Description
BCSENZ/S/STD/W
Senza S Grade 2 Backplate White
BCSENZ/S/PLUS/W
Senza S Grade 2/3 Backplate White
BCSENZ/S/PLUS/L/W
Senza S Grade 2/3 Backplate White with Backlight
BCSENZ/S/WF/W
Senza S Wirefree Kit White (WD & CPM)
BCSENZ/S/COV/W/B
Senza S Cover White with Blue Lens
BCSENZ/S/COV/W/B/L
Senza S Cover White with Blue Lens with Backlight Panel
BCSENZ/S/DUM/WH
Senza S Dummy Backplate White
BCSENZ/X/STD/W
Senza X Grade 2 Backplate White
BCSENZ/X/PLUS/W
Senza X Grade 2/3 Backplate White
BCSENZ/X/PLUS/L/W
Senza X Grade 2/3 backplate White with Backlight
BCSENZ/X/WF/W
Senza X Wirefree Kit (WD & CPM)
BCSENZ/X/COV/W
Senza X Cover White
BCSENZ/X/COV/W/L
Senza X Cover White with Backlight Panel
BCSENZ/X/DUM/W
Senza X Dummy Backplate
BCSENZ/S/WF/WD/W
Senza S Wirefree Warning device Backplate (WD)
BCSENZ/X/WF/WD/W
Senza X Wirefree Warning device Backplate (WD)
BCSENZ/WF/CPM/WH
Senza Wirefree Control Panel Module White (CPM)
S
aFety
p
recautIonS
p
roduct
order
codeS
