Page 15 of 16
v3.1
Hold off voltage:
10-15 vDC (12 vDC nominal)
Current Consumption @ 12 vDC:
SAB Mode
SCB mode
Quiescent:
~35mA (battery fully charged)
~35mA (battery fully charged)
Back-light ON
~55mA
~55mA
Alarm (Sounder & Strobe):
~300mA
~120mA
Siren:
~175mA
~110mA
Strobe:
~55mA
~55mA
Sounder
:
Type:
Piezo
Acoustic
Output:
Tone
Sound duration:
≤ 15 minutes, ≤ 3 minutes or intermittent
Sound Output Levels:
~105db(A) @ 1 metre
Triggering Method:
-ve applied, +ve applied
Strobe:
Type:
LED
Flash
Rate:
~ 60 per minute
Strobe saver mode:
~ 7 per minute
Triggering Method:
-ve applied, +ve applied
Battery:
Type:
Lithium Ion (rechargeable)
Nominal
Voltage:
3.7
volt
Capacity:
2000mAh
LED Indicators:
Tamper (GREEN), Hold-off (RED) and Battery charging (RED)
Tamper Detection:
Removal from mounting and cover.
S
tandardS
:
EN50131-1: 2006 + A2: 2017
Security Grade: 2/3, Environmental Class: IV
EN50131-4: 2009
Warning device Type: Z
W
arnIng
d
evIce
(Wd)
Battery :
Type:
Lithium Manganese Dioxide (non-rechargeable)
Nominal
Voltage:
3
volt
Capacity:
4700mAh
Approximate life:
~2 years (depending on the number and duration of activations)
Current Consumption:
Quiescent:
~3.5mA
Alarm (Sounder & Strobe):
~245mA
Sounder:
Type:
Piezo
Acoustic
Output:
Tone
Sound duration:
≤ 15 minutes, ≤ 3 minutes or intermittent
Sound Output Levels:
~105db(A) @ 1 metre
Strobe:
Type:
LED
Flash
Rate:
~ 60 per minute
Strobe saver mode:
~ 7 per minute
LED Indicators:
Tamper (BLUE), Comms (GREEN)
Tamper Detection:
Removal from mounting and cover.
Radio Frequency:
868MHz
Narrowband
Communication Distance:
100m (Line of Site)
c
ontrol
p
anel
m
odule
(cpm)
Power supply:
10-15vDC (12vDC nominal)
Current Consumption @12vDC:
Quiescent:
~20mA
Alarm (Sounder & Strobe):
~30mA
LED indicators:
RED & GREEN used for diagnostics
Tamper Detection:
Cover and Removal from mounting
S
tandardS
:
EN50131-1:2006 + A2:2017;
Security Grade 2, Environmental Class II(
CPM
) IV(
WD
)
EN50131-4:2009;
Type
W
EN50131-5-3:2017;
Grade
2
S
pecIFIcatIon
W
ired
W
ire
-f
ree
