![background image](http://html.mh-extra.com/html/cpi/r900/r900_installation-manual_2675046004.webp)
Phase1 - R900 Installation Guide (V2.5 2020-04-16).docx
Monitor Lamp
Monitor Lamp LED Error flash code
The Monitor Lamp LED indicates the state of the bill validator by using lighting patterns.
Monitor Lamp
State
Description
ON
OFF
Communication Error
Check Connector
Check Machine Status
Flash 1
OFF
Active High-Security Mode
Check the DIP SW setting
Flash 2
OFF
Dirty Sensors
Acceptance Rate <80%
Need to Clean Sensors
Flash >3
OFF
Abnormal Error
Refer to OP manual
Contact ASC
OFF
Flash 1
Cashbox Out of Position
Cashbox is Opened
Close Cashbox
OFF
Flash 2
Cashbox Full
Check Cashbox
Collect Bills
OFF
Flash >3
Sensor Errors
Check the Sensor Status
ON
Flash
Hard Failure
Contact ASC