![background image](http://html.mh-extra.com/html/cpi/r900/r900_installation-manual_2675046003.webp)
Bezel LED
Bezel LED Error flash code
The Bezel LED indicates the state of the bill validator by using lighting patterns.
Bezel Lamp
State
Description
Flashing in Green
Every 0.3s, 2 times,
Repetition
Stand-by
Ready to accept
The inserted bills
Flashing in Green
Every 0.3s, 5 times
Active
High-Security
Mode
Upon power-on, when the
initial cycle is completed,
the lamp operates one-flash
cycle in Green (0.3s, 5
times) to indicate in high-
security mode
Flashing in Green
Every 0.5s
In Cleaning Mode
Ready to be inserted
cleaning sheet to clean-up
the bill path
OFF
No Power
Communication Error
Inhibited All Bills
Bill is in Inlet Sensor
Busy (in validation)
Abnormal State
Turn on Power
Check connector
Check DIP SW setting
Pull out the returned bill
---
Check BV status