3DJH0DVWHU18VHU*XLGH
6ROYLQJ'XSOH[HU3UREOHPV
The following procedure guides you through multiple actions that may solve this duplexer prob-
lem. Proceed one step at a time until the problem is solved—you may not need to complete the
entire procedure. If one of the steps in this procedure corrects the problem but the identical prob-
lem returns in less than 50 prints, call for service.
1. Open and then firmly close all of the printer doors and covers.
Interlock switches monitor the position of printer doors and covers. When a door is closed,
the interlock switch is activated and the duplexer can operate. When a door is open, the inter-
lock switch is not activated and the duplexer cannot operate. If a door is not firmly closed, the
interlock switch may not be fully activated—resulting in an inoperative duplexer.
2. Test the printer by printing single-sided sheets from the main tray.
If you cannot print a sheet of paper from the main tray and the printer does not display an
error code, go to “Inoperative Printer” on page 5-3. If you can print a sheet of paper from the
main tray, proceed to the next step.
3. Open the rear cover of the printer. Remove and reinstall the duplexer.
If the connection between the duplexer and the printer is not intact, the duplexer will not
receive power or logic commands, resulting in an inoperative duplexer
4. Examine the printer driver settings to make sure the duplexer is available as an installed
option.
5. If the duplexer is correctly set as an installed option, reload the printer driver software.
The printer driver software running on the host computer may be damaged. Reinstalling the
software is an easy and inexpensive way to isolate or eliminate the problem. Refer to
t
he
DRIVERS
folder on the Electronic Library CD-ROM for detailed instructions on installing
the driver.
6. Call your service technician.
This problem may be caused by a malfunctioning or broken component that requires service.
'XSOH[HU2SHUDWHV(UUDWLFDOO\
The following characteristics define this duplexer problem:
■
The duplexer does not function correctly.
■
The control panel does not display an error code.
The following procedure guides you through multiple actions that may solve this duplexer prob-
lem. Proceed one step at a time until the problem is solved—you may not need to complete the
entire procedure. If one of the steps in this procedure corrects the problem but the identical prob-
lem returns in less than 50 prints, call for service.
1. Open the rear cover of the printer. Remove and reinstall the duplexer.
If the connection between the duplexer and the printer is not intact, the duplexer will not
receive power or logic commands, resulting in an inoperative duplexer.
2. Test the printer by allowing it to run for a few days without the duplexer installed.
If the printer operates erratically when the duplexer is not installed, refer to “Printer Operates
Erratically” on page 5-23.
Summary of Contents for PageMaster 260N
