ACQUAMARINA POOL MANUAL
pag. 19 / 21
www.cpa-piscine.it
Rev.00
–
18/11/20
IX.
Assembly of the vertical supports
Attach the bottom joint protector to the vertical support using the screws provided
(see diagram 39). Line up all of the screw holes of the vertical supports with the
top and bottom metal pieces. Fix the vertical support onto the top and bottom metal
pieces and hand screw into place. Continue this process around the pool until all of
the vertical supports are attached. Check and adjust the alignment of the vertical
supports to ensure that they are indeed vertical and straight then go around the pool
and tighten all screws top and bottom (see diagram 40).
X.
Attaching joint protectors
Clip the non-screw end of the side joint protector over the side top platform join and screw the other end into place. Using the
same method, attach the joint protectors for the top platforms and screw into place. Do not over tighten! (See diagram 41 e 42)
Diagram 42
Diagram 41
Diagram 39
Diagram 40
