Cozzia CZ-7505, User Manual

Page: 36 / 76

The massage chair is connected to the power
supply but is not functioning
1. Check to see that the plug is properly connected
and working
2. Ensure the massage chair switch is in the ‘I’
position
Possible overheating due to prolonged use. Turn off
the power for at least 30 to 50 minutes
1. Ensure the chair is plugged into a working outlet
2. Turn the power OFF and ON again
The remote control works but the massage chair
is not functioning
Both the remote control and the massage chair
are not functioning
This massage chair is controlled by a microcomputer and is thus susceptible to power surges of +10 to - 15%.
The following situations may arise in the event of a power surge:
If you continue to have problems, please read the warranty card and contact the Cozzia service department.
TROUBLESHOOTING
GROUNDING INSTRUCTIONS
Grounding Pin
Grounded Outlet Box
Grounded Outlet
This product must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for the electric current to reduce the risk of electric shock. This product is equipped with a cord that
has an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Danger - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check
with a qualified electrician or service technician if it will not fit the outlet. Have a proper outlet installed by a
qualified electrician.
This product is for use on a nominal 120V circuit and has a grounding plug that looks like that plug illustrated
below. Make sure that the product is connected to an outlet having the same configuration as the plug. No
adapter should be used with this product.
In the following events, please switch off the main power switch immediately and disconnect the power
cord from the electrical outlet:
• If liquid is accidentally spilled onto the massage chair. This may result in electric shock or
malfunction.
• If the fabric of the backrest is torn and the internal components are exposed.
• If pain or discomfort is felt during massage, stop operation immediately and consult your
doctor.
•
If you detect any malfunction or any other abnormal condition during operation.
• If there is power failure. Injury may occur when power is restored unexpectedly.
• If there is lightning.
4. Instances When the Massage Chair Should Not Be Used
5. Assembly and Repair of the Massage Chair
6. Things to Be Noted About the Power Plug and Cord
• Do not disassemble the backrest cover of the massage chair. Touching the internal
components may result in malfunction or electrical shock.
• This massage chair must only be professionally serviced or repaired. Only disassemble or
repair the massage chair if directed by a Cozzia service rep.
• Check that the Alternating Current (AC) voltage corresponds with the specifications indicated for the
massage chair.
• Do not connect or disconnect the power plug from the electrical outlet with wet hands. This may result in
malfunction or electric shock.
• When disconnecting the power plug, pull it by holding the plug, not the cord.
• Although operation will be stopped automatically by the Auto-Timer function, always remember to switch
off the main power after use.
• Do not place the power cord under the massage chair or on any other heavy objects.
• Do not wind the power cord around the massage chair as this may damage the cord and result in a fire or
electric shock.
• Do not operate the massage chair with a damaged cord or extension cord.
• Do not use the massage chair if the electrical outlet is loose.
• If the power cord is damaged, it should be replaced by a qualified technician.
34