ConteraIP
®
Bullet EX
Megapixel Camera
47
ConteraIP
®
Bullet EX | Installation Manual
the schedule settings on the selected time. A light
blue color on the time block indicates that the alarm
schedule is enabled, while a light grey color
indicates that the alarm schedule is disabled.
Alternatively, you can manually enter numbers to
configure the hours and minutes from start to end
for all weekdays.
S
: Click “S” to set up a 24-hour schedule for a
particular day.
D
: Click “D” to clear the previous schedule for a
particular day.
*This function is supported
depends on models.
Trigger Alarm Detection
When a signal is detected from Alarm in, the Alarm
out will be triggered.
Trigger Motion Detection
When a motion detection event is detected, the
Alarm out will be triggered.
Trigger Video Analytics
When a video analytics event is detected, the Alarm
out will be triggered.
Type
Selects the type: N.O (Normal Open) or N.C
(Normal Close)
Off Time
Specifies the alarm duration
Remote Server
•
Host Address
•
Port
•
Username
•
Password
Host Address
: Specifies the host name or IP
address of the FTP server.
Port
: Specifies the port number of the FTP server.
Username
: Specifies the login username of the
FTP server.
Password
: Specifies
the login password of the FTP
server.
FTP Upload Handler
•
Enable Trigger
Event
Enables
and selects a desired trigger source. The
options are
Trigger Alarm Detection*
,
Trigger
Motion Detection
,
Trigger Video Analytics
, and
Trigger Scheduled
.
*This function is supported depends on models.
SMTP Notification
Handler
From
: Specifies the email address of the sender
