ConteraIP
®
Bullet EX
Megapixel Camera
13
ConteraIP
®
Bullet EX | Installation Manual
Wall Mount
For a proper wall mount installation, the AV-WMJB-W wall mount and MD-CAP-W wall mount cap are
required (sold separately). A wall mount should only be attached onto hard ceilings including wood,
plastic, metal, and concrete.
1.
Using the Mounting template, prepare the mounting provisions for the camera installation.
2.
Connect wall mount cap and wall mount.
NOTE: The thread size for Top shield, pendant pole and mount is 1.5” NPT.
3.
Attach the wall mount to the wall using the four drywall screws provided or any optional hardware
suitable for the mounting surface.
4.
Run the Ethernet Cable and outside power cable (if necessary) through the supplied rubber
gasket and then through the wall mount. Ensure the gasket is seated properly.
5.
Attach the mounting plate to the MD-CAP-W with the supplied screws.
6.
Prepare the network cable with the supplied grommet and insertion tool.
