Costar Arecont Vision ConteraIP AV5456PMIR-S Installation Manual Download Page 56

Page: 56 / 60

ConteraIP

Bullet EX

Megapixel Camera

ConteraIP

Bullet EX | Installation Manual

System Options

Menu

Feature

Description

Firmware Upgrade

Click

Browse

to choose the firmware upgrade file,

and then click

Upgrade

Download Log

Records all the status information of the camera in
list format. Downloads the log file to the computer
as a text file.

Note: The log file is protected by a password.
Please contact with Arecont Vision technical
support team.

Reboot & Restore
Settings

•

Reboot the

Camera

•

Restore Factory
Default Settings
Except Network
Settings

•

Restore to

Factory Default
Settings

Reboot the Camera

: Reboots the camera.

Restore Factory Default Settings Except
Network Settings

: Restores all settings to factory

default except the network settings.

Restore to Factory Default Settings

: Restores all

settings to factory default.

Camera Name

Type in the camera name.

Get Time from

•

NTP Server

•

Computer
System

NTP Server

: Synchronizes the date/time

information with defined NTP server. After setting
up the desired

Time zone

and

NTP Server

, click

Apply NTP Server Configuration

Note: Please make sure set up appropriate
gateway before configuring the NTP server.

Computer System

: Synchronizes the date/time

information with current

computer’s date/time. Once

this option selected, click Update Time from the
computer.

Time Zone

Specifies the country/ city of the time zone from the
drop-down menu.

NTP Server

Specifies the desired NTP server

Summary of Contents for Arecont Vision ConteraIP AV5456PMIR-S





























































Search results

Summary of Contents for Arecont Vision ConteraIP AV5456PMIR-S

Reviews:

Related manuals for Arecont Vision ConteraIP AV5456PMIR-S

Brands by name

Popular brands

Costar Arecont Vision ConteraIP AV5456PMIR-S, Installation Manual

Search results

Summary of Contents for Arecont Vision ConteraIP AV5456PMIR-S

Reviews:

Related manuals for Arecont Vision ConteraIP AV5456PMIR-S

Brands by name

Popular brands