ConteraIP
®
Bullet EX
Megapixel Camera
12
ConteraIP
®
Bullet EX | Installation Manual
7.
Align the hole on the camera with the hole on mounting plate, and install the grommet on camera
housing.
NOTE: If using the side connection of the NPT port, you need to install the supplied grommet
without a through hole on the camera housing, and remove the cap covering the side entrance,
otherwise; leave the cap in place. If using the NPT port, always use Teflon tape around the
threads to ensure proper sealing. The conduit fits ¾” NPT standard. Ensure NPT port is facing
downward.
8.
Fasten securely four captive screws.
9.
Attach the Dome Cover to the ConteraIP
®
Outdoor Dome EX camera and fasten securely four
captive screws.
10.
To configure the camera, reference the
camera discovery, set-up and configuration
section.
