COSMOGAS AGUADENS Series, Installation, Operating And Maintenance Manual

Page: 68 / 72

68 AGUADENS
COSMOGAS
ATTENTION !!!
The modification of these parameters could cause the appliance, and therefore the plant, to malfunction.
For this reason only a technician that has the awareness and in-depth knowledge of the appliances can modify
them.
To access this menu, move the microswitch as stated in figure 6-6 detail “B”.
11 - ENGINEERS TEST MODE
Parameter Parameter Description M.U. Setting range
Factory value
Customised
value
3001 Cascade adress (N/A)
(N/A)
(N/A) 0 (N/A)
3002 Selection type From 50 to 55 See figure 6-8
3012
Domestic hot water operating
mode
/
0 = DO NOT USE ;
1 = Storage tank with temperature sensor;
2 = Storage tank with thermostat;
3 = DO NOT USE ;
4 = DO NOT USE ;
5 = DO NOT USE ;
6 = DO NOT USE ;
7 = DO NOT USE ;
8 = Instantaneous water heater;
8
3013 Plant fill automatic valve (N/A)
(N/A)
(N/A) 0 (N/A)
3014
Instantaneous domestic hot
water pre-heat
/
OFF = No pre-heat
ON = With pre-heat
OFF (N/A)
3015
Maximum central heating
temperature (N/A)
(N/A)
(N/A) 80 (N/A)
3016
Minimum central heating
temperature (N/A)
(N/A)
(N/A) 30 (N/A)
3017 Pre-heat mode (N/A)
(N/A)
(N/A) 0 (N/A)
3018 Minimum DHW temperature
°C
From 30 to 75 40
3019 Maximum DHW temperature
°C
From 30 to 75 60
3020
Domestic hot water flow rate
sensor
/
0 = B;
1 = DN 8; (model 16)
2 = DN 10;
3 = DN 15; (models 22 and 37)
4 = DN 20;
5 = DN 25;
1 (16)
3 (22)
3 (37)
3021
2nd Exhaust flue sensor (1014)
(N/A)
(N/A) (N/A)
0 (N/A)
3022
Central heating minimum
pressure (N/A)
(N/A)
(N/A) 0,8 (N/A)
3023 Water pressure sensor
/
0 = Disabled;
1 = Enabled;
0 (16)
0 (22)
0 (37)
3033 Modulating pump (N/A)
(N/A)
(N/A) 0 (N/A)
3034 Modulating pump delta T target (N/A)
(N/A)
(N/A) 15 (N/A)
3040 Antilegionella for water heater
/
ON = Antilegionella enable
OFF = Antilegionella disabled
ON
3041 Tank supply temperature increase
°C
From 0 to 30 0
3042 Minimal water flow
l/min
From 0 to 25,5 2,5
N/A = Not applicable