manualshive.com logo in svg

COSMOGAS AGUADENS Series, Installation, Operating And Maintenance Manual

The COSMOGAS AGUADENS Series offers exceptional performance and reliability for heating and hot water systems. To ensure proper installation and operation, it is essential to refer to the comprehensive "Installation, Operating And Maintenance Manual." This indispensable manual is available for free download at manualshive.com, providing users with valuable insights and guidance.

Share
Download
background image

2

AGUADENS

COSMOGAS

INDEX

1 - GENERAL SAFETY RECOMMENDATIONS ..................................................................................................4

1.1 - National laws and regulations .................................................................................................................................. 5

2 - GENERAL INFORMATION .............................................................................................................................6

2.1 - Presentation ............................................................................................................................................................. 6

2.2 - Model overview ........................................................................................................................................................ 6

2.3 - Manufacturer ............................................................................................................................................................ 7

2.4 - Symbols key ............................................................................................................................................................. 7

2.5 - Maintenance ............................................................................................................................................................. 7

3 - MAIN COMPONENTS .....................................................................................................................................8

4 - OPERATION .................................................................................................................................................12

4.1 - Operation and intended use of the appliance ........................................................................................................ 13

4.2 - Examples of installation ......................................................................................................................................... 14

5 - INSTALLATION .............................................................................................................................................16

5.1 - Opening the packaging .......................................................................................................................................... 16

5.2 - Dimensions and minimum safety clearances ......................................................................................................... 16

5.3 - Choosing suitable installation location ................................................................................................................... 16

5.4 - Mounting the appliance .......................................................................................................................................... 16

5.5 - Domestic hot and cold water .................................................................................................................................. 16

5.6 - Gas ......................................................................................................................................................................... 17

5.7 - Condensate drain ................................................................................................................................................... 18

5.8 - Safety valve ............................................................................................................................................................ 18

5.9 - Hydraulic and gas connections .............................................................................................................................. 19

5.10 - Water softener (on request) ................................................................................................................................. 19

5.11 - Electrical connections ........................................................................................................................................... 20

5.11.1 - Power supply cable connection ............................................................................................................... 21

5.11.2 - CR04 remote Time control (on request) .................................................................................................. 21

5.12 - 

External secondary return configuration

 ......................................................................22

5.13 - Connection water heater to Storage tank ............................................................................................................. 23

5.13.1 - Anti- legionella precaution ....................................................................................................................... 23

5.14 - Flue systems ........................................................................................................................................................ 25

5.14.1 - Exhaust flue with indipendent combustion air grille type B23

 ................................................................. 26

5.14.2 - “Split 80/80PP” System (polypropylene) (Type C43; C53; C83) AGUADENS 16 and 22 ....................... 27

5.14.3 - “Split 80/80PP” System (polypropylene) (Type C43; C53; C83) AGUADENS 37 ................................... 28

5.14.4 - “Split 80/80PP” System (Type C43; C53; C83): accessories available ................................................... 29

5.14.5 - “Split 80/80PP” System (Type C43; C53; C83): installation examples ................................................... 30

5.14.6 - “60/100PP vertical coaxial” System (polypropylene) (C13; C33 Type) ................................................... 31

5.14.7 - “60/100PP horizontal coaxial” System (polypropylene) (C13; C33 Type) ............................................... 32

5.14.8 - “60/100PP Coaxial” System: accessories available ................................................................................ 33

5.14.9 - “60/100PP Coaxial” System: installation examples ................................................................................ 34

5.14.10 - “80/125PP vertical coaxial” System (polypropylene) (C13; C33) .......................................................... 35

5.14.11 - “80/125PP Coaxial” System: accessories available .............................................................................. 36

5.14.12 - “80/125PP Coaxial” System: installation examples .............................................................................. 37

6 - OPERATING .................................................................................................................................................38

6.1 - Operating ............................................................................................................................................................... 38

6.1.1 - User instructions ....................................................................................................................................... 38

6.1.2 - Filling the condensate drain siphon .......................................................................................................... 38

6.2 - General recommendations regarding the supply of gas ........................................................................................ 38

6.3 - Type of gas for which the appliance is regulated. .................................................................................................. 39

6.4 - Conversion of the appliance from one type of gas to another ................................................................................ 39

6.5 - Ignition .................................................................................................................................................................... 41

6.6 - Check the gas supply pressure .............................................................................................................................. 41

6.7 - Measurement and adjustment of CO2 levels ......................................................................................................... 42

6.8 - Self-learning and calibration of the minimum and maximum capacity output ........................................................ 43

6.9 - Adjust the domestic hot water flow rate

 .................................................................................................................. 43

6.10 - Check the capacity input ...................................................................................................................................... 43

7 - USE ...............................................................................................................................................................44

7.1 - Display ................................................................................................................................................................... 44

7.2 - Ignition procedure .................................................................................................................................................. 44

7.3 - “User menu” ........................................................................................................................................................... 45

7.4 - Adjustment of the domestic hot water temperature ................................................................................................ 45

7.5 - Timings of the various functions ............................................................................................................................. 45

7.6 - Display Energy Saving mode ................................................................................................................................. 45

Summary of Contents for AGUADENS Series









































































Reviews:

No comments

Related manuals for AGUADENS Series

Laars MIGHTYTHERM HH User'S Information Manual preview
MIGHTYTHERM HH
Brand: Laars Pages: 4
Vaillant ecoTEC exclusive SERIES Installation And Maintenance Instructions Manual preview
ecoTEC exclusive SERIES
Brand: Vaillant Pages: 48
Ravelli HR EVO 200 SMART Use And Maintenance Manual preview
HR EVO 200 SMART
Brand: Ravelli Pages: 357
Saunier Duval Xeon 50ff Instructions For Use Installation And Servicing preview
Xeon 50ff
Brand: Saunier Duval Pages: 40
Lamborghini Caloreclima NINFA N LOW NOX 24 MCS Instructions For Use, Installation And Maintenance preview
NINFA N LOW NOX 24 MCS
Brand: Lamborghini Caloreclima Pages: 144
Crown Boiler BDS-080 Installation Instructions Manual preview
BDS-080
Brand: Crown Boiler Pages: 23
U.S. Boiler Company ALTAC-200 Installation, Operating And Service Instructions preview
ALTAC-200
Brand: U.S. Boiler Company Pages: 100
Radijator EK 06 Smart EU Technical Instructions For Assembly, Operation And Maintenance preview
EK 06 Smart EU
Brand: Radijator Pages: 32
Nieco JF92G Owner'S Manual preview
JF92G
Brand: Nieco Pages: 28
Trianco EuroStar 50-90 User, Installation, Commissioning & Servicing Instructions preview
EuroStar 50-90
Brand: Trianco Pages: 23
Hamworthy Milborne 500 Series Design Installation, Commissioning And Operating Instructions preview
Milborne 500 Series
Brand: Hamworthy Pages: 64
Baxi Main Combi 24 HE Installation And Service Instructions Manual preview
Main Combi 24 HE
Brand: Baxi Pages: 56
Baxi Solo 2 50 RS Installation And Servicing Instructions preview
Solo 2 50 RS
Brand: Baxi Pages: 44
Baxi PRIME 24 Installation Manual preview
PRIME 24
Brand: Baxi Pages: 128
HTP Pioneer PHR100 Installation, Start-Up, Maintenance, Parts, Warranty preview
Pioneer PHR100
Brand: HTP Pages: 56
Sime 8112100 User, Installation And Servicing Instructions preview
8112100
Brand: Sime Pages: 132
Bryan Boilers FF1000 Installation & Operation Manual preview
FF1000
Brand: Bryan Boilers Pages: 85
Anvil CBR9012 Specifications preview
CBR9012
Brand: Anvil Pages: 2

Brands by name

Popular brands

Load more brands