45
AGUADENS
COSMOGAS
7 - USE
7.3 - “User menu”
Entry into the “User menu” is highlighted by the visual display
“F”, in figure 7-1, which indicates parameters that can assume
values from
1001
to
1999
. To enter the “User menu”:
1.- hold the RESET key down for 2 seconds until the visual
display “F” shows
1001
;
2.- press the
and
keys to scroll the parameters
situated inside the user menu;
3.- hold down the RESET key for more than 2 seconds to
exit the “User menu”;
If no key is pressed for more than 60 seconds, the menu is
exited automatically.
The parameters in section 7.7 can be queried in this menu.
7.4 - Adjustment of the domestic
hot water temperature
The temperature of the domestic hot water is adjusted by
operating on the
and
keys. On pressing one
of the two keys, the visual display “H” in figure 7-1 will start to
flash and show the temperature that is being set. The range of
adjustment for the temperature of the domestic hot water goes
from 40°C to 60°C. For higher output temperatures, contact
your technician to change the maximum output temperature
factory setting, see section 11.
7.5 - Timings of the various functions
To preserve the life of the appliance, improve the generated
comfort and increase energy savings, have been inserted
timings during operation. These timings are:
- Post circolation pump: each time ending on the domestic
service, the pump continues to operate for 40 seconds;
- Anti-block pumps: every 24 hours is a forcing of the
recirculation pump and of the additional storage tank
charging pump (if present);
- Anti-legionella; if the appliance is connected to a storage
tank for the D.H.W. production, every seven days, this latter
is forced, to temperature of 60°C to perform disinfection
against the bacterium of the legionella. This function turns
ON even after two hours that the appliance has been
electrically powered.
7.6 - Display Energy Saving mode
To reduce the consumption of display energy, it will switch
off automatically after 5 minutes from the last operation
performed. This function can be deactivated or the time
modified via parameter
2100
present in the “Installer menu”
(see section 7.8). If the parameter is set at
OFF
, the display
will remain on constantly.
Summary of Contents for AGUADENS Series
Page 65: ...65 AGUADENS COSMOGAS 8 MAINTENANCE ...
Page 70: ......
Page 71: ......
Page 72: ...COSMOGAS s r l Via L da Vinci 16 47014 MELDOLA FC ITALY info cosmogas com www cosmogas com ...
