Cosen SH-460M, Instruction Manual, Page: 93 / 96

11 ‐ 1
Section 11
Warranty
Warranty
New machines are warranted to be free from defects in workmanship and material for a period of
one (1) year from the date of shipment by Seller. The warranty period is based on normal usage of
two thousand eighty hours (2080) per year and is reduced proportionately for any excess usage.
Products, which under normal operating conditions in Buyer’s plant are defective in workmanship or
material, will be repaired or replaced at the option of Seller.
This warranty does not cover shipping freight charges for either the return of the defective part or for
the shipping of the replacement or repaired part.
Seller will have no obligation to repair or replace perishable parts, or materials or parts damaged by
misuse, negligence or failure of Buyer to provide appropriate maintenance and service as stated in
the operator’s manual or industry standard and normally acceptable practices.
This warranty does not apply if the machine has been altered or modified without our prior written
consent.
In the case of components or units purchased by Seller including work holding devices, tool holders,
motors and controls, the warranty shall not exceed that received by Seller from the supplier of such
components or units.
Seller will not assume responsibility for products or components returned to Seller without prior
consent or for unauthorized repairs to its products, even though defective.
Electrical Equipment: The warranty available for all electrical components to the Buyer will be voided
if the voltage supplied to the machine is found to be outside the stated voltage of the machine by +/ ‐
10% and/or grounded at machine.
Accessories Supplied with Manufacturer’s Equipment: The warranties available to the Buyer are
those extended by the accessory manufacturer, if any, to the extent they are in force and effect. The
ACCESSORY MANUFACTURER’S WARRANTY, if any, is exclusive and is in lieu of all other warranties
whether written, oral or implied.