Cosen SH-460M, Instruction Manual, Page: 42 / 96

4 ‐ 6
After the blade motor is running, the function of this switch is disabled for the safety concern.
2. Coolant pump on/off switch
When this switch is set at “|“, the coolant pump operates and the cutting fluid will be injected. When
this switch is set at “

”, the coolant pump stops and cutting fluid supply will be terminated.
Cutting fluid can lower the workpiece temperature during cutting.
3. Saw blade start button
Press this button to start the blade motor.
Make sure the material is securely clamped by the vise before cutting.
4. Saw blade stop button
Press this button to stop the blade motor.
After the cutting job is done, the saw blade will stop and the saw bow will automatically go up
to the top limit switch position.
5. Saw bow up button
When this button is pressed, the saw bow rises until the operator lets go of the button.
While pressing the saw bow up button can stop the running blade, please still make use of the
emergency stop button in an emergency.
6. Saw bow slowly down button(N/A)
7. Saw bow down button
When this button is pressed, the saw bow descends according to the preset speed of blade descend
speed control knob .
Before descending the saw bow, please move the guide arm to a safe position to prevent it
from hitting the vise.
Press saw bow up button to stop saw bow descending.
8. Emergency stop button
Press this button to stop the machine in an emergency. When the button is pressed, it brings the
machine to a full stop. The button locks when pressed. In order to unlock it, please turn the button
clockwise.