Cosen SH-460M, Instruction Manual, Page: 41 / 96

4 ‐ 5
4. Saw bow down button
When this button is pressed, the saw bow descends according to the preset speed of blade descend
speed control knob .
Before lowering the saw bow, the guide arm must be positioned outside the vise in order to
avoid hitting the vise and causing damages.
5. Blade descend speed control knob

This knob is used to adjust the descend speed of the saw blade.

Turning the knob clockwise increases the blade descend speed.

Blade descend speed is a determining factor to a good cutting time and quality cutoff surface.

Also commonly known as the flow control valve
Model with hydraulic vise
No. Control Function No. Control Function
1 Vise open/clamp switch 6 Saw bow slowly down button (N/A)
2 Coolant pump on/off switch 7 Saw bow down button
3 Saw blade start button 8 Emergency stop button
4 Saw blade stop button 9 Power indicator lamp
5 Saw bow up button 10 Blade descend speed control knob
Control Buttons
1. Vise open/clamp switch
When the switch is turned to the left, the vises open. When the switch is turned to the right, the vises
close until the operator lets go of the switch or until the full stroke vises are clamped together.