Cosen SH-460M, Instruction Manual, Page: 40 / 96

4 ‐ 4
CONTROL PANEL
The control panel is located on the top of the electrical box. The operator must fully understand the
function of each switch and button before operating the machine.
Model without hydraulic vise
No. Control Function No. Control Function
1 Blade start button 4 Saw bow down button
2 Emergency stop button 5 Blade descend speed control knob
3 Saw bow up button
Control Buttons
1. Blade start button
Press this button to start the blade motor and the built ‐ in light will come on.
Make sure the material is securely clamped by the vise before cutting.
Press the saw bow up button to stop the running blade.
2. Emergency stop button
Press this button to stop the machine in an emergency. When the button is pressed, it brings the
machine to a full stop. The button locks when pressed. In order to unlock it, please turn the button
clockwise.
3. Saw bow up button
When this button is pressed, the saw bow rises until the operator lets go of the button.
While pressing the saw bow up button can stop the running blade, please still make use of the
emergency stop button in an emergency.
2 1 3 4 5