VOUT_OV_FAULT_RESPONSE
[41h]
R/W Byte
Configures the output overvoltage fault response.
Display format
: -
Initial setting
: B8 h
Range of setting and reading
: -
Delay time for automatic recovery
: 200ms + 50ms × (bit2-0)
*1: When continuing normal operation of equal to or more than another 30 seconds of automatic-resets
about the number of times of the automatic-reset operation, it is reset.
4
bit2-0
111 - 000
8
2
7
11
1
Access
#
6
5
3
bit
7
6
5
4
3
2
1
0
Initial setting
1
0
1
1
1
0
0
0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
bit
Value
Overview
bit7-6
00
It continues operation.
( not supported )
01
It continues operation to the delay time which is prescribed in bit2-0 and in case
of being an abnormal condition behind the delay time, too, it does the return
processing to specify in bit5-3.
( not supported )
It does the return processing to specify in bit5-3 after stop.
bit5-3
000
It stops output.
110 - 001
It stops if an automatic-reset is worked in the number of times ( - 6 times ) of bit5-
3 and a malfunction isn't canceled (In the automatic-reset interval, it is prescribed
in bit2-0).*1
111
Until off operation is done, an automatic-reset is worked (In the automatic-reset
interval, it is prescribed in bit2-0).
10
In case of the extraordinary continuation, it stops output and it resumes operation
by the abnormal cancellation.
( not supported )
It sets the delay time of the automatic-reset.
Applications manual
For CHS300/400/500-
I
series
- 34 -
