Cosel CHS series, Communications Manual

Page: 55 / 56

MFR_OT_FAULT_COUNT [F2h] Read
It reads the number of times stopping by the overheating protection feature.
Note1: For clear the count, use MFR_CLEAR_FAULT_COUNT [ F5h ].
Note2: For saving count, don't block the input voltage, between 100ms output voltage is stopped.
Display format : Linear(Count)
Initial setting : 0 [ times ]
Range of setting and reading : 0 - 255 [ times ]
MFR_UT_FAULT_COUNT [F3h] Read
It reads the number of times stopping by the undertemperature feature.
Note1: For clear the count, use MFR_CLEAR_FAULT_COUNT [ F5h ].
Note2: For saving count, don't block the input voltage, between 100ms output voltage is stopped.
Display format : Linear(Count)
Initial setting : 0 [ times ]
Range of setting and reading : 0 - 255 [ times ]
MFR_TON_MAX_FAULT_COUNT [F4h] Read
It reads the number of times stopping by the activation time exceeding protective function.
Note1: For clear the count, use MFR_CLEAR_FAULT_COUNT [ F5h ].
Note2: For saving count, don't block the input voltage, between 100ms output voltage is stopped.
Display format : Linear(Count)
Initial setting : 0 [ times ]
Range of setting and reading : 0 - 255 [ times ]
MFR_CLEAR_FAULT_COUNT [F5h] Send
It resets the number of times stopping by the protective function.
Note1: After command transmission, do not shutdown the input voltage for more than 1 second.
Display format
: -
Initial setting : -
Range of setting and reading
: -
It reads the number of times stopping by protection operation for over start-up time.
1
1
It reads the number of times stopping by the overtemperature fault.
It reads the number of times stopping by the undertemperature fault. 1
bit7-0 00000000
bit7-0 00000000
00000000 bit7-0
Overview
#
bit value Overview
#
bit value Overview
# bit value
Applications manual
For CHS300/400/500-
I
series
- 54 -