10
6. Install the Left and Right Pedals
Attach the Left and Right Pedals (5, 6) to the Crank (9). (See Figure 6)
NOTE:
The Left and Right Pedals (5, 6)
and Crank (9) are marked with
“
R
” & “
L
”.
7. Maintenance and Treatment
1) Verify that all the bolts and nuts are locked properly and the turning parts should be turned freely
without any scream.
2) Clean the equipment with soap and slightly damp cloth only. Please do not use any solvent to clean the
equipment.
Malfunctions and treatment
Malfunction Reason
Treatment
Base is unstable.
1. Floor is not flat or there is small
object under the front or rear
stabilizer.
2. The front and rear base feet
have not been leveled when
assembling.
1. Remove
the
object.
2. Adjust the front and rear base feet.
Handlebar or seat
cushion is shaking.
The screws and round knob are
loose.
Tighten the screws and round knob.
Loudly noise from the
moving parts.
The interval of the parts is improper
tighten.
Open the covers to adjust.
No resistance when
riding the upright bike.
1. The interval of the magnetic
resistance increases.
2. Tension control is damaged.
3. Running belt is slip.
1. Open the covers to adjust.
2. Change the tension control.
3. Open the covers to adjust.
