CorroVenta A15ES, User Manual

Page: 7 / 67

A15ES
© Corroventa Avfuktning AB 2022.05 7 (67)
22. If the machine is in an elevated position, the rotor cassette must not be extracted as this will
shift the center of gravity and potentially cause the machine to fall over. In elevated
positions, the support integrated with the rotor cassette will not reach floor or other
supporting surface and will thus not help prevent accident.
23. Wet air hose/pipe that is used and connected to the dehumidifier must be corrosion-
resistant and able to withstand 80°C heat.
24. The machine weighs more than 160kg and is too heavy to be lifted manually.
25. For transport and lift of the machine, only tested and approved/certified equipment shall be
used respecting the weight of the machine given on the nameplate.
26. Prior to transport or lift of the machine, verify that the rotor cassette is protracted and
locked in position. The service hatch, the filter hatches as well as the electronics cabinet shall
be closed and locked.
27. For transport and lift, the machine must be appropriately secured and the risk area
evacuated and continuously monitored.
28. If after transport and/or lift, there is reason to believe the machine may have been damaged,
it must not be powered and used until it has been inspected by qualified personnel.
29. The machine must not be installed in such a manor that other exterior equipment or
machinery forces the air flows, neither pushes nor extracts air from the machine.
30. The machine must never be used with any other accessories than those listed in this manual
or those specifically approved by Corroventa Avfuktning AB.
For further advice on product safety and use, please contact the supplier.
Product Overview
Main components of the machine
Inspection window,
energy meter and
RCD.
Control Panel Power intake
Main power switch
Lock, electronics
cabinet
Emergency stop
button
Reset button,
Emergency stop
System connector
Dry air outlet