CorroVenta A15ES, User Manual

Page: 4 / 67

A15ES
© Corroventa Avfuktning AB 2022.05 4 (67)
User Manual A15 ES
Intended use
The A15 ES is intended, and shall only be used for, dehumidification of air indoors and at normal
atmospheric pressure. The machine is not to be used in environments where combustible gases can
be present.
Other use of the A15 ES, including use in violation of the instructions and restrictions of this manual,
may result in personal injury and/or damage to equipment and property
Introduction
The adsorption dehumidifier A15 ES is developed for construction drying and drying of water
damages. The machine is of four-hole type and has a separate regeneration air flow allowing outdoor
air to be used for regeneration if that is preferrable for energy efficiency or for minimized effect on
air indoor air pressure. For maximal flexibility in the installation, the machine is equipped with stubs
allowing easy attachment of hoses or pipes for the respective air flows.
By use of the control panel, the user can adjust and optimize the operation of the A15ES to the work
to be undertaken, controlling the operation of the fan and selection of proper control mode using
either the built-in or an external RHT sensor.
The A15 ES is also compatible with the
SuperVision™ and can thus be remotely operated and
controlled through use of smart phone, PC or tablet. The SuperVision™ collects and stores
measurement data and allows the user easily to create the graphs required for progress analysis
during the project as well as a complete and comprehensive report of entire project once it is
competed.
The machine exterior is made from stainless steel for durability and to maintain a proper appearance
even after numerous transports and installations. Its limited dimensions allow for the machine to be
transported on a standard EUR-pallet and for it to pass through standard doors which is important
for construction as well as water damage restoration use.
•
High capacity
•
Chassis made from stainless steel
•
Energy efficient
•
Digital control panel
•
Robust
•
kWh and hour counter – resettable work counters
•
Easily maintained
•
Compatible with SuperVision ™