CorroVenta A15ES, User Manual

Page: 26 / 67

A15ES
© Corroventa Avfuktning AB 2022.05 26 (67)
Default View
When the machine is operating, it can always be
stopped, set to standby, by use of the center button
below the display.
When the machine is running with a control mode
other than MAN, manual, the setpoint value which is
highlighted with black background at the center of the
screen can be increased and decreased by use of the
minus (-) and plus (+) buttons respectively.
Control Mode
The Control Mode determines whether the drying shall
be continuous (MAN
– manual mode) or if it shall
operate only when required as determined by the
ambient climate.
The selected control mode is displayed in the lower left
corner of the default view.
The Control Mode selection screen is reached by one
push of the upper right button.
The following basic control modes are available:
MAN Manual, continuous drying.
RH Drying down to selectable Relative
humidity, %.
MIX Drying down to selectable mixing ratio,
g/kg.
DEW Drying down to selectable dew point, °C
HYG Drying controlled by external hygrostat
connected to the machine.
Through its network capabilities, the machine can also
connect to external RHT sensors and use their values to
control the operation rather than using the built-in
Relative Humidity and Temperature sensor. To this