CorroVenta A15ES, User Manual

Page: 30 / 67

A15ES
© Corroventa Avfuktning AB 2022.05 30 (67)
When timer is activated, as a first step, the machine
asks the user to verify that its time and date settings
are correct. If so, push OK. If changes are required,
push edit to do the required changes before continuing.
In the next step, the user is allowed to set the time
interval within which the machine shall operate. The
machine remembers the timer settings from last time it
was used and presents that data as default.
Network
Note: Install all the system cables before powering up
the machines.
The A15 has networking capabilities allowing it to be
remotely monitored and controlled through
SuperVision
™
.
Once established, in the network menu, the
presentation will toggle between the slave units which
are referred to with type, for instance A4, and address
on the bus, for instance 101.
To change the settings of a slave unit, press Edit and
the select the given slave. As a confirmation of what
unit was selected, the display backlight of the selected
unit will start blinking.
The desired settings can still also be made on the
respective machines themselves.
When all desired settings are made, start the Master
machine and the slaves will be started automatically