31 of 109
CORRADI S.P.A. - USER MANUAL - EXYL
2 - 04.2011
IT
ALIANO
DEUT
S
CH
FR
ANÇ
A
IS
ESP
A
ÑOL
ENGLISH
PRODUCTS
FEATURES
PRODUCT FEATURES
NON COMPLIANCE/ DEFAULT
WARNINGS
GENERAL
Defaults have to be reported within 8 days starting on
installation date on the customer's site (point of reference is
the date indicated on the declaration of correct installation
issued to the end user by the installer). See general sales
term.
The structure is not watertight. In case of particularly violent storms with strong winds
water seepage may occur.
In case wind values should exceed those shown on the statement of correct installation, it
is necessary to close the awning. It is possible to use a properly calibrated anemometer.
The product does not guarantee the snow load. In presence of snow, even of low
intensity, the canvas should be closed.
To have your product warranty the certificate of proper installation is MANDATORY. A copy
must be given to the final customer and a copy shall be sent to Corradi SpA. The
reception of the duly completed certificate will activate the product warranty.
Any change to the product not expressly authorized by Corradi SpA leads to loss of war-
ranty.
The structures that are located in an urban environment are subject to pollutants (smog,
acid rain), smoke from chimneys, fumes from cooking, and weather in general. It is normal
for the fabric and the structure to get dirty. The structures and the fabric are NOT self-
cleaning.
SELF-SUP-
PORTING
By applying a lateral load on the pillar an oscillation in the structure may occur. This
movement is not a sign of structural weakness, but is considered normal for the type of
structure. The structure has been calculated by qualified engineers using the Eurocodes
and is guaranteed to wind up to the level indicated in the EC certificate and in the
Declaration of correct installation.
CANVAS
Depending on the installation conditions, it is possible that the cloth gets dirty (pollutants,
smoke from chimneys, smog, etc.). In this case it may be necessary to clean the fabric
more frequently as indicated in the section maintenance.
The cloth is not immune from burns caused by cigarette butts, etc..
In particular situations of use of the structure, condensation may occur on the inside of
the fabric. To limit this condition proceed with an adequate ventilation of the room.
The appearance of mold in the embossing of the fabric is due to the presence of moisture
on the sheet that favores the formation of micro-organisms. It is therefore necessary to
clean the fabric at regular intervals, more frequently if necessary.
The presence of folds on the fabric after the first installation may be due to packaging. It is
necessary to keep the fabric in position for at least 10 days, and evaluate the quality of the
product after this period of time.
The presence of folds on the fabric after 10 days has to
be considered a default.
