© Copyright, Core Protection Systems Ltd, 2021
Page 32
The adapter can be cleaned in the same way as the HM1400 and FFM1600 respirators. Please see
section 3.1.3 for more information.
Do not leave the product wet for extended periods of time. Thoroughly dry before attaching to the
mask.
Store at normal room temperature in a sterile/uncontaminated environment.
Please note the adapter is designed to be handled with care and should not be roughly handled /
cleaned.
3.4.2.4 Disposal
To establish the safest disposal method, this will require a risk assessment by your organisation.
However, Corpro can advise the following:
•
Materials which make up the adaptor are:
o
Nylon – The main body of the adaptor and additional clip-on component (Recyclable)
o
Polyvinyl chloride (PVC) – The tube attached to the adaptor itself and the two extra
tubes (Not currently recyclable)
o
Silicone – The gasket (Recyclable)
•
The adapter may be classified as hazardous waste, depending on your working environment.
This will need to be established. If this is the case, an appropriate disposal method should be
outlined by your organisation and followed.
•
If the adapter is not classed as hazardous waste, methods for recycling the nylon and silicone
components may be provided by local authorities or specialist third-parties.
3.4.3 Spray Barrier
Part of the Corpro Barrier range and designed for use with the HM1400 half mask and P3 R filter pair.
Protects the eyes and face from most droplets and aerosols and provides a layer of protection over the
mask exhale valve. Can be used for COVID-19 protection only.
