© Copyright, Core Protection Systems Ltd, 2021
Page 22
FFM1600:
Written instructions:
Step 1 – Mounting
1.
Ensure you have suitable and adequate filters for your intended use. Remove packaging and
read the instruction manual.
2.
Place the filter onto your mask and rotate clockwise.
3.
You will feel a click once in place. The upper edge of the filter should be pointing towards the
back of the mask. Your filters will always lock and seal eventually from any initial orientation.
4.
Repeat process for both filters.
5.
Ensure filters are mounted parallel to the sealing surface and make sure the front-facing filter
and mask arrows align.
Step 2 – Removal
1.
Remove filters by rotating anti-clockwise.
3.3.2 Maintenance
This section applies only to the filters and does not include the mask unless stated otherwise.
3.3.2.1 Shelf Life
All filters have an expiration date. This is stated on the label on the front of each filter. Do not use after
the expiration date or if obviously damaged.
Regardless, filters should be changed regularly as part of maintenance. Please see section 3.3.2.2 for
more information.
