12
620919540
Trouble
Remedy
Probable Cause
NO ICE DISPENSED FROM
ICE PORTION CONTROLLER
A.
Insufficient ice supply in ice
bin.
A.
Replenish ice supply as required.
B.
Ice in ice bin bridged (stuck
together).
B.
Gently tap on ice to break it loose.
C.
No electrical power to
dispenser.
C.
Plug in dispenser power cord, or
check fuse or circuit breaker.
D.
Insufficient or no CO
2
supply
to dispenser.
D.
Restore CO
2
supply to dispenser.
E.
Ice chute cover not properly
installed.
E.
Make sure that cover is “snapped”
into place.
F.
Defective ice chute interlock
switch.
F.
Replace interlock switch.
G.
Defective interlock relay.
G.
Replace relay.
H.
Defective 24V transformer.
H.
Replace transformer.
I.
Defective portion controller.
J.
Defective ice gate cylinder.
K.
Defective ice gate solenoid
valve.
L.
Agitation relay wiring incorrect.
M.
Defective agitation relay.
N.
Defective agitator motor start
capacitor or start relay.
I.
Replace controller.
J.
Replace cylinder.
K.
Replace solenoid valve.
L.
Red wire should be connected to
“+” terminal (#3) of relay coil.
M.
Replace relay.
N.
Replace defective component.
NO ICE DISPENSED FROM
MANUAL ICE DISPENSE
PUSHBUTTON SWITCH
A.
Manual/Auto toggle switch in
“Auto” position.
B.
Insufficient or no CO
2
supply
to dispenser.
C.
Defective 24VAC transformer.
A.
Move toggle switch to “Manual”
position.
B.
Restore CO
2
supply to dispenser.
C.
Replace Transformer
D.
Defective manual override
solenoid valve.
E.
Defective manual ice dispense
pushbutton switch.
F.
Defective agitator motor or
start capacitor or start relay.
D.
Replace valve.
E.
Replace switch.
F.
Replace defective component.
G.
Defective ice gate cylinder.
G.
Replace cylinder
