Technical Support Manual – 03/2017 Rel. 0
Page 16
3
Example
Example
Turn the shaft and make sure all of
the values between
0 ÷ 255
are
read (from 000 to 255 turning
clockwise, and from 255 to 000
turning anti clockwise). When the
reset "notch" on the encoder disc
is in position H12, the displayed
value must be 000 (or it must be
reset to 000 if the value is
different).
If the count is incorrect, clean the
encoder disc; check and/or adjust
the mechanical DEB board
fastening system. If there are no
mechanical problems, then check
the cable and change the encoder
board if necessary.
4
Press on icon to exit the ENCODER
TEST program.
Summary of Contents for TOUCH MEC 1000 SONAR
Page 1: ...WHEEL BALANCERS TOUCH MEC 1000 SONAR TECHNICAL SUPPORT MANUAL UK...
Page 2: ......
Page 53: ......
