Cormach LIGRO, Use And Maintenance Manual

Page: 38 / 157

Operator's manual
Ligro - Ligro GT
37
UK
- install the head control valve and the
cylinder mount, then connect
the air supply hoses. (
see Fig. 2a )
2a
HOISTING/
HANDLING
In order to remove the machine from the
pallet, hook it as shown in fig.3.
3
This hoisting point must be used when-
ever you need to change the installation
position of the machine. Do not attempt
to move the machine until it has been
disconnected from the electricity and
compressed air supply systems.
INSTALLATION
CLEARANCES
WARNING
The regulations in force concerning safe-
ty at work
must be complied with when
choosing the installation position.
IMPORTANT
:
for the correct and safe opera-
tion of the machine, the lighting level in the
place of use should be at least 300 lux.
WARNING
If the machine is installed outdoors, it must
be properly sheltered
under a roof.
Install the tyre changer in the chosen work
position, complying with the minimum
clearances shown in fig.4.
4
1000
500
750