Cormach GEO 10, Service Manual

Page: 5 / 44

Technical service manual
GEO 10
5
SIM CARDS
The aligner cannot be operated unless a hardware protection key has been inserted.
The main protection board configured for the basic version is supplied with the machine.
Additional functions can be added to the wheel aligner by installing the upgrade kits (see
the User and Service Manual).
Installing the Hard Lock device:
Insert the tip of a pen into the hole at the side to open the SIM holder (fig. 7).
Remove the wheel aligner SIM card (fig. 6) from its punched support (keep the support
with the serial number for future queries) and insert in the SIM holder (fig. 7), with the gold
contacts facing upward. Push the SIM holder in.
For the update procedure, refer to the User and Service Manual.
WHEEL ALIGNER SOFTWARE
The wheel aligner is supplied with the software already installed. The CD supplied car-
ries a copy of the software.
The program is installed in the C:\Program Files\Alignment\… folder.
When the equipment is switched on, the software release installed will be displayed
on the screen (centre left).
Compare this release with that stated on the installation CD-ROM supplied with the
aligner.
If the CD-ROM release is more recent than the release installed, upgrade the aligner
software.
Upgrading the wheel aligner software
The files which contain the translations of the program texts into foreign languages will
be found in the folder:
C:\PROGRAM FILES\ALIGNMENT\TEXT\
Each language has its own files in a specific sub-directory:
STRING.INI: contains all the texts of the icons and the program windows.
REGOLAZ.INI: the texts of the animations.
STRSETUP.INI: the texts of the user set-up.
STRSETUPA.INI: the texts of the after-sales service set-up.
The files which contain the foreign-language translations of the “On-line help” pages
are in the folder: C:\PROGRAM FILES\ALIGNMENT\HELP\.
• Quit the operating system by clicking the icon and entering the password
“end” (in lower-case letters).
• Insert the CD-ROM in the drive and wait for the upgrade installation program to run
automatically.
• Select the language required and proceed with the installation procedure.
WARNING
Once the software has been installed, the PC restarts automatically.