Cormach GEO 10, Service Manual

Page: 23 / 44

Technical service manual
GEO 10
23
- The data for the current check are displayed alongside each measuring sensor.
- The values outside the tolerance thresholds are displayed in red, whereas the values
within the tolerance thresholds are displayed in green.
The following keys are active in this window:
F1 displays the on-line “Help” function
F2 goes back to the previous screen
F11 displays the menu with the relative functions.
These are the menu options:
•
Start context (goes back to the starting screen)
• Print (prints the values found in the calibration check)
• Down (moves on to the next step in the calibration check - for step-by-step perfor-
mance of the zero and full scale calibration)
•
Up
(moves back one step in the calibration check)
• Help (recalls the Help screen relative to the current screen)
Warning!
If some values are outside the permitted tolerance ranges the zero and full scale
calibration procedure should be performed. Before performing the zero- and full scale
setting procedure, it is always important to check that the mechanical calibration is
correct.
Mechanical Calibration Check
This window is used to check the mechanical calibration of the measuring sensors (or
the value read from several transducers without the influence of possible electronic
corrections).
The window shows the calibrator with the measuring sensors fitted, each in its own
position.
The data for the current check are displayed alongside each measuring sensor.
The values outside the tolerance thresholds are displayed in red, whereas the values
within the tolerance thresholds are displayed in green.
The following keys are active in this window:
F1 displays the on-line “Help” function
F2 goes back to the previous screen
F11 displays the menu with the relative functions.