Corghi A 2018, Operator'S Manual

Page: 119 / 352

A 2030 - A 2025 - A 2022 - A 2018 - A 224 A - A 224 Operator’s manual 119
EN
To increase the effectiveness of the air jets, manually lubricate and lift the lower
bead before activating the nozzles.
CAUTION
- Fully press the inflation pedal for a short time (Fig. 38). The tyre will expand, and the beads
will seat.
To improve the operation of the tubeless tyre inflation system the line pressure must
be between 8 and 10 bar.
CAUTION
- Unlock the wheel from the wedges.
- Move the inflation pedal into an intermediate position (Fig. 39) to inflate the tyre. Frequently
check that the pressure NEVER exceeds the maximum pressure indicated by the manufacturer
on the tyre.
Risk of explosion. During the bead insertion phase, do not exceed the maximum pres-
sure indicated by the manufacturer
CAUTION
Operate the inflation jets only for tyre bead insertion.
CAUTION
Discharge the air from the pneumatic system before disconnecting the power supply or other
pneumatic components. The air is accumulated in the tank for operating the bead insertion jets.
Operate the air jets only after making sure that the rim is correctly blocked.
CAUTION
39 38