S51.ZT2S/K-C1 Piezo Z/Tip/Tilt Platform User Manual
8
For the protection of the product, we do not recommend that the load is too high. If a
high load must be used, please appropriately low the position of the center of gravity of
the load.
The wrong mounting way is shown in the figure below:
It is forbidden to mount the load on one side of the moving platform, which will cause
serious damage to the product, as shown in the figure below.
Excessive length of screws selected in the fastening and connecting process will lead to
failure in installation or leakage of bolts, which will expose the product and scratch the
product, affecting the motion accuracy of the product. Short bolts will lead to insufficient
compactness of the connection and easy looseness, which will damage the internal
structure of the product during operation.
