Cleaning Preferences
Edge Cleaning
After robot finishes cleaning the open areas of your floor, it uses
Edge Clean to ensure that it has cleaned along walls and around
furniture legs. If you prefer a quicker edge cleaning, press the
button on Remote Control.
5.
Single Room Cleaning
Coredy R550 (R500+ ) intensively cleans one single room and stops
after 30 minutes. Select this mode only when one specific room
needs to be cleaned. Make sure to confine Coredy R550 (R500+ ) to
the room by closing the door.
Press on the remote control to start cleaning in Single Room
Mode.
6.
Spot Cleaning
When you select Spot Cleaning, robot intensely cleans a localized
area by spiraling outward about 3 feet (1 meter) in diameter and
then spiraling inward to where it started. When Spot Cleaning,
robot boosts its vacuum power to provide the best cleaning
possible where you need it. To use Spot Cleaning, place robot on
top of the localized debris and press (Spot) on the Remote
Control.
3.
Max Vacuuming Cleaning
Robot increases its vacuum power to provide a deeper clean when
press the button on Remote Control, Max Vacuuming
Cleaning is Off by default.
4.
13
MAX
MAX
MAX
MAX
MAX
MAX
