background image

StripPoint User Manual  rev.1_0 

 

 

19 

 

 

Compliance Information 

 

System Compliance 

 
CORE Lighting Limited declares that this product conforms to the specifications listed in this manual, following 
the provisions of the European R&TTE directive 1999/5/EC: 
 
Restrictions on Hazardous Substances (RoHS) (2002/95/CE) 
Electromagnetic Compatibility (2004/108/EC). 
Safety (EN 60950) 
Technical requirements for radio equipment.  (EN 300 328) 

 
CAUTION—This equipment is intended to be used in all EU and EFTA countries. 
Outdoor use may be restricted to certain frequencies and/or may require a license for operation. Contact local 
Authority for procedure to follow. 

 

FCC & Industry Canada Statement for Radio Compliance 

W-DMX Transmitter & Receiver 

 

We, 

 

CORE Lighting Limited 
Prindion House 
Kingsmill Lane 
Painswick 
Gloucestershire GL6 6SA 

 

declare under our sole responsibility that the product 
 
FCC ID: UQT-WDMXOEMPCBF 
Model: W-DMX OEM PCB F 
 
complies with Part 15 of the FCC Rules. 

 

Operation is subject to the following two conditions: 

 (1) this device may not cause harmful interference, and 

(2) this device must accept any interference received, including interference that may cause undesired 
operation. 

To assure continued compliance, any changes or modifications not expressly approved by the party responsible 
for compliance could void the user's authority to operate this equipment. 
 

NOTE:

 This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. 
 
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. 
 
However, there is no guarantee that interference will not occur in a particular installation. If this equipment 
does cause harmful interference to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try and correct the interference by one or more of the 
following measures: 
 
• Reorient or locate the receiving antenna. 

Summary of Contents for StripPoint
























Reviews: