StripPoint User Manual rev.1_0
11
DMX Addressing
In Slave mode DMX channel mapping for each Pixel and LED on the fixture can be selected. A pixel
consists of 4 leds, Red, Green. Blue, White. Pixel 1 is the right-hand end LED on the batten, pixel 18 is
the left-hand end LED (with the LCD screen facing towards the user)
DMX Start Address:
To set the DMX start address press
key when the display shows the current address. Use the
keys to select the new start address then
to confirm.
In Master mode the StripPoint will transit in 4 channel mode only (at the time of going to press).
Function EFFECT
The StripPoint is equipped to generate a number of special effects as
a stand-alone unit when Function EFFECT is selected. This is true
whether DMX is placed in Slave or Master Mode, although at the time
of going to press will not output these to connected Slave units when
DMX is in Master Mode (this feature may be added as a future development).
By pressing the
key the last used effect type is brought up,
which can then be changed using the
keys.
By pressing the
key to confirm the effect type, the speed can be
adjusted from a range 1 to 10 using the
keys. When
confirmed with the
key the screen reverts to show the effect and
speed.
Function
EFFECT
EFFECT
R’bow 10
Type:
R’bow 1
Summary of Contents for StripPoint
Page 1: ...USER MANUAL Wireless LED Batten...
Page 2: ......
