Core Lighting StripPoint, User Manual

Page: 8 / 23

StripPoint User Manual rev.1_0 6
i
Getting Started
StripPoint Key Elements
Operation
Turning On and Off

Push and hold this power button for >1 second to switch the unit ON or OFF

The display will show
“CORE Lighting” and software version for a few seconds before starting

The display backlight will extinguish after a short time to reduce power use
Battery Charging

The fixture has a built-in charger optimized for the battery and will charge while attached to the
mains supply whether the unit is active or not

Only use the supplied mains cable or charging case

For best results recharge battery fully before storage

When charging in the charging case, it is best to ensure the case lid remains
open to disperse heat , although the lid may be closed in cooler climates.

Switch off the charger unit and unplug once fully charged

Whilst charging the LED indicator will illuminate in RED or AMBER

(Red indicates an empty battery moving to Amber when significantly charged)

Once fully charged the LED indicator will show GREEN
!
DO NOT use any charger other than the unit supplied with the StripPoint.
When using a charging flight case, ensure the unit is pushed fully down on the charging
connector. The charge light on side of the unit should illuminate to signify this has been
done.
Charged
Charging
Power On/Off
Charging Status LED
Display
WDMX button and
LED indicator