11
Replace the panel and secure before aligning the
Camera Package with the Chassis and fasten into
place with three fixing screws provided.
MN4100
attached to
CDX8900-470
mounting arm.
MN4100
Base showing M6x4 mounting
boss and two compression glands.
Ethernet connection here
MN4100
The CorDEX MN4100 industrial automation
thermal imager is intended for permanent
installation into fixed locations for industrial
automation, control and safety monitoring
purposes. Installation is via an M6x4 threaded
boss located on the base of the camera
and optional mounting arm, part number
CDX8900-470 is also available.
10
If communications are to be used, connect an
Ethernet cable with RJ45 plug to Chassis.
Chassis mounting screws
RUGGED
AUTHORITY
MONITIR Series Thermal Imaging Cameras
– User Manual
11
Document Reference MONITIRSERIESUM Rev. A
