12
Push fit 'flipper seals' (PN40309) onto the back edge of the doors.
Ensure the flipper seal 'flaps' are on the outside of the doors.
Push fit 'magnetic seals' (PN40311) onto the closing edge of the
doors (the same side as door handle holes).
Note:
Ensure the magnetic seals are positioned as shown.
Note:
Wetting the glass with water will help fit the seals.
PN
40309
Outside
face of
door
Door
handle
holes
PN40309
PN40311
Door
handle
holes
Outside
face of
door
PN40311
PN40311
11
Fit 'flipper seals' (PN40308) onto the edge of the fixed
panels.
Ensure the flipper seal 'flaps' are on the
inside. Note:
Wetting the glass with water will help to
fit the seals.
From inside the enclosure, place fixed panel retainer
covers (PN80618) onto the top and bottom fixed
panel brackets. Fix using the 12mm screws and fit the
retainer caps (PN50370).
PN80618
Inside
PN40308
PN50370
12mm
Fixed
panel
bracket
10
Check the door frame is vertical and is centrally positioned between the wall channel and corner post.
From inside the enclosure, in the positions shown, drill through the wall channel and corner post into the fixed panel and
magnetic profile using a 3mm drill bit,
do not drill too deep!
Fix using 6 x 10mm screws.
From inside
10mm
13
ø 3
mm
