58
REPRODUCTION, EVEN IN PART, OF THE ILLUSTRATIONS AND/OR TEXT IS FORBIDDEN.
www.coral.eu
JETCLEAN DF
Series - edition 01/12
3. GENERAL PRELIMINARY INFORMATION
3.1. DIRECTIVES
In the design and construction of the machine the following directives were held as reference:
DIRECTIVES
2006/42/CE
Machinery Directive
2004/108/CE
Electromagnetic Compatibility Directive
2006/95/CE
Low Voltage Directive (LVD)
3.2. GENERAL SAFETY INSTRUCTIONS
The instructions and safety instructions referred to in this manual take into account that, in the workplace, the
requirements of the document “Testo Unico D.lgs. 81/08” (regarding workplace safety) must be known and
applied. These contain important information relating to:
• safety of persons engaged in operation and maintenance;
• safety and efficiency of the machine.
3.3. RESIDUAL RISKS
The machine is delivered with all safety systems needed for the operator to work in conditions of maximum safety,
but risks remain from which the operators must be protected, especially during the maintenance, installation and
cleaning stages.
Operators, for their part, must use personal protective equipment suited to the risk to be addressed. The most
used are: gloves and masks, goggles, safety footwear etc. ...
GENERAL RESIDUAL RISKS
Residual risk
Description
1
VOLTAGE PRESENCE
DANGER
There would be a risk of electric shock in the event in which the
operator performs maintenance or replacement operations of the
switch and leaves the under voltage plug inserted.
2
MOVING PARTS
DANGER
In the event in which the operator performs maintenance operations
by inserting his/her hands into the fan suction area, having not
disconnected the plug from the mains and locked the switch, external
individuals could potentially start the machine and cause serious
injury.
3
EXPLOSION
RISK
In the event in which, despite the prohibition clearly set out in
paragraph
“3.9. INTENDED USE/ UNINTENDED USE”
, the
machine is used to extract elements that by nature or by reaction are
flammable, or pose an explosion risk.
4
OVERTURNING
RISK
During operation, the area around the machine is to be considered as
having a risk of overturning. Keep a safe distance. Refer to the figure
in paragraph
“5.2. INSTALLATION”
.