71
REPRODUCTION, EVEN IN PART, OF THE ILLUSTRATIONS AND/OR TEXT IS FORBIDDEN.
www.coral.eu
EC regulation maintenance and user Manual
5.3. CONNECTIONS
For the electrical connection, follow this procedure:
STEP
ACTION
1
Check:
• the voltage and
• frequency of the mains.
The correct data for use of the machine are shown on the nameplate on the electrical engine or in
the technical data table in the manual.
2
The
JETCLEAN DF
machine is equipped with a five-pole plug, to power the 220 volt pneumatic
cleaning system. Make sure that the electricity power supply system is equipped with a neutral and
a with an earth connection.
3
Insert the five-pole plug.
4
For a short time, start and stop the machine to check the correct rotation direction, indicated by the
arrow on the engine.
5.4. ADJUSTMENTS
5.4.1. FLOW ADJUSTMENT
To
adjust the flow of the unit
, follow this procedure:
STEP
ACTION
1
Acting on the butterfly gate (optional) mounted on the ducting using the appropriate the knob.
5.4.2. ADJUSTMENT OF THE TIMER FOR CARTRIDGE CLEANING
Per la
regolazione del timer per la pulizia delle cartucce
, procedere:
PASSO
AZIONE
1
Press the regulator (
1
) to adjust the opening time in milliseconds of the valve.
2
Press the regulator (
2
) for adjusting the break time between one shot and the next one, from a
minimum of 0,5 min to a maximum of 45 min.
WARNING!
The timer is equipped with a TEST push button, to verify proper operation of the pneumatic
plant cleaning.
1
2