3 5
GB
7.2 Switching the chair on
7.3 Operation
The chair is ready for operation as soon as the mains plug is plugged in and the power supply is
established.
The control panel in the form of two buttons for adjusting the seat shell is located on the inside of
the left armrest.
The basic position of the chair is reached when the armrests are parallel to the floor. As a riser aid,
it is possible to move the seat shell beyond the basic position.
Press the front button to raise the seat shell.
Press the rear button to lower the seat shell.
7.4 Switching the chair off
Disconnect the mains plug from the socket and disconnect the battery. The chair is now without
power and switched off.
After disconnecting the mains plug of the chair, you should not reconnect it for at
least 60 seconds.
