WARNING
To avoid the risk of fire and electric shock, this product should be installed by a qualified electrician
only.
WARNING
To avoid electric shock:
be certain power is OFF before and during installation and maintenance.
ATTENTION
Incorrect termination of supply wires may cause internal damage and will void warranty. To ensure
your D2 W MDME 2400 enjoys a long life,
double check ALL your connections with this
Instruction Sheet
before turning the power on.
CAUTION
For continued protection against risk of fire, replace the internal module fuse only with the same type
and rating.
CAUTION
Antennas used with this device must be installed to provide a separation distance of at least 20 cm
from all persons to satisfy RF exposure compliance.
DO NOT:
• Operate the transmitter when someone is within 20 cm of the antenna;
• Operate the transmitter unless all RF connectors are secure and any open connectors are properly
terminated;
• Operate the equipment near electrical blasting caps or in an explosive atmosphere.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
D2 W MDME 2400 Series
IF 1584
Wireless Ethernet Modem
