D2 W MDME 2400 Wireless Ethernet Modem
IF 1584 Rev. 1
IF 1584 Rev. 1
Page 70
Network A Settings
Client Bridge Settings
IP Address 192.168.0.17
Gateway IP 192.168.2.51
Subnet Mask 255.255.255.0
Ethernet IP 192.168.2.50
Gateway IP 192.168.0.1
Subnet Mask 255.255.255.0
Wireless IP 192.168.2.50
Subnet Mask 255.255.255.0
Access Point Router Settings
Network B Settings
Gateway IP 192.168.0.1
IP Address 192.168.2.201
Ethernet IP 192.168.0.191
Subnet Mask 255.255.255.0
Subnet Mask 255.255.255.0
Gateway IP 192.168.2.51
Wireless IP 192.168.2.051
Subnet Mask 255.255.255.0
In the Network A PC, a routing rule is to be set.
This will allow Network A and B to have access to each other. This is entered under cmd
prompt.
Route ADD 192.168.2.0 MASK 255.255.255.0 192.168.0.191.
This says access everything on Network B (192.168.2.0) with the Mask of 255.255.255.0 on
Network A via the Ethernet IP Interface 192.168.0.191.
IP Address 192.168.2.0 will allow everything on this network to be shared by the router. When
adding a routing table, you will need to enter this in. Once entered in, the router will determine
whether to pass information over the router if it is addressed to do so or not. For added security,
MAC address filtering could be added as mentioned earlier in Section 3.
